1000 T High Hardness Silicone Rubber Shapping Machine For
Easy operation and repair
The vulcanizing machine is mainly use to produce rubber pads, Each
working layer equipped with two sets moulds, it can take turn
vulcanization. Thereby improve production efficiency
The center distance in certain, allowed to install large diameter
of hydraulic cylinder, which can reduce the hydraulic cylinder the
amount, and the simple structure, maintenance is less.
The beam in the section of force is reasonable, the modulus needed
than live in small, can reduce weight
Manufacturing installation is simple, pipe configuration, whole
hidden appearance tidy and beautiful. Box type flat-band plate
vulcanizing machine single box board the lateral stiffness ratio of
the poor, but because the mast frame type flat-band plate
"all-in-out" series silicone rubber injection molding machine is
advanced rubber molding technology, it's structure is compact with
wide applicability, high efficiency and high quanlity.
Especially it is suitable for the rubber products of complex
shapes, exhausting difficultly, difficult to molding, and need high
Own Patented "all-in-out" Technology:
- Visible Feeding System:
- Avoid the traditional techniques which cannot know about the
situations like temperature/hardness/ Plasticizing before
- Efficiently get control of the raw material Plasticizing status,
can make adjustment in time.
- Excellent Plasticizing Effects:
- Excellent Plasticizing effects, reduce the waste rubber material, avoid blocking the cylinder, save much more raw material when
- Easy to switch the different colors of raw material,easy for cleaning.
- High Temperature Ranges:
- Simple structure, Plasticizing temperature between 90 ℃ and 100 ℃,
ensure good Plasticizing effects.
- Good Plasticizing effects can ensure a good injection products.
- Save Raw Rubber Material:
- Can handle with the raw rubber material as hardness as 85°.
- Improve coefficient of utilization of raw material.
- all material in, and all out:
- All-in-out structure, sprueless injection without material loss
controlable injecting material temperature
- Excellent for high precision molding parts
Suitable for automotive and electronic rubber parts, high / cold
temprature precision rubber parts, especially NBR products.
All-in-out structure, sprueless injection without material loss
controlable injecting material temperature.
Excellent for high precision molding part
5-10 times better accuracy than conventional injection machine the
measuring precision of 1000cc injection volume is up to ±0.1g
Anti-collision molding system prevent mold damage occurring from
Servo-controlled system up to 40% energy saving
Proportional backpressure controlling characteristic
Installation and debugging: Our engineers will teach you about the
installation and debugging for free.
Technology training : Our company will offer technology training
for your operation.
After-sales service: We will supply the free repairment on this
machine for one year, but will supply the maintenance lifetime. (
the service is only for natural damage)
Main Technical Parameters:
|Operation table size||mm||300*300||400*400||550*560||700*700||700*700||850*850||1000*1000||1200*1200|
|Min. Mold Thickness||mm||50||50||100||100||100||100||150||150|
|Distance of Thermo-plate||mm||350~450||400~500||500~600||500~600||500~600||600~700||650~800||650~800|
|Distance of Tie bar||mm||400*140||515*230||640*310||820*395||820*395||970*500||1140*600||1340*800|
|Die sinking type||2RT-3RT-4RT-Upper Mold-Lower Mold|
|Electric Heating Power||Kw||8.4||10||15.3||24||24||29.75||35||42|